Brakes/Levers/Pads

Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.

A drilled out lever blade shaves weight as well as improves grip. This is a full hydraulic disc brake system for drop bars. It sports an integrated master cylinder in the low-profile, ergonomically shaped lever body. This brake is for singlespeed aficionados, the rider who wants simplicity without sacrificing braking performance. Using our Hylex Di2 Adapter Kit this system can be used with a Di2 drivetrain. For product manuals see support page or click here. Not sure if your caliper is post mount or flat mount please contact our customer support team. SPECIFICATIONS - A separate bleed kit is required for shortening brake lines - Hylex RS uses 5.5mm hose - Front Brake is a left-hand lever attached to a hose coupler and 800mm of hose - Rear Brake is a right-hand lever attached to a hose coupler and 1800mm of hose - Full Open Hydraulic System - Ergonomic and perfectly sized hoods create a natural extension from the rider's hands to the bike - Utilizes TRP's semi-metallic pad compound - Compound works well in dry conditions but may wear quicker in wet/muddy conditions - Post mount version compatible with Shimano M525/M515 pads - Flat mount version compatible with Shimano K02S/K04S pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

- Set of (6) precision machined Torx T25 titanium disc rotor bolts

Ideal pad for everyday use. Compound works well on all aluminum rims and well suited for softer alloys, including magnesium. Fits: - Campagnolo 10|11|12 speed DOES NOT FIT - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

•Designed for caliper & cantilever brakes •Forged aluminum construction •25.4/26.0mm clamp •270g pair

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •3 finger •Pulls two brake cables with one lever •136g each

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •4 finger •205g pair

- Side-pull design - Includes lever, caliper, cable, and housing - 53-71mm reach - 330g per set

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Bulldog-style long-reach side pull brake - Forged alloy construction - Rear caliper only - 238g each

- Alloy 135mm V-brakes for front or rear applications - Linear pull, front or rear compatibility - Dual spring tension adjustment

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Constructed from steel and nylon •4 finger •217g pair

•Side pull brake •Includes lever, caliper, cable and housing •Steel

• Side pull brake • Includes levers, calipers, cables and housing • Aluminum

•Dual pivot brake design •Forged aluminum construction •340g pair •SHIMANO Equivalent BR-2400

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •3 finger •Locking feature keeps brake engaged •230g pair

- Economical 3-finger replacement brake levers for basic replacement and repairs - Large 3-finger length blade offers an easy to engage platform and universal practicality - Available for Canti and linear-pull-style brakes

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction •Includes replacement bolt for mounting on fork

•Compatible with most road caliper brakes •All weather compound •Includes one extra set of pads

•Compatible with most road caliper brakes •All weather compound

•55mm cartridge inserts •Compatible with most road caliper brake pad holders •All weather performance

• Side pull caliper design • Includes levers, calipers, cable and housing • Steel construction • 780g set

- Forged alloy construction - 3-finger length - Compatible with caliper and cantilever brakes

• Compatible with many older caliper brakes • Flat top design metal pad holder • All weather pad compound